Generate Patches

images/download/attachments/122259331/CmdCADGeneratePatches.svg

This command allows you to generate CAD surfaces from a mesh and a polyline network. The surface is made of patches fitted onto the mesh.

Requirements

Select the mesh and a polyline network previously designed (polylines and/or set of polylines) and launch the command.


  1. When you open the command, a pre-computation is launched. A shell composed of CAD curves and faces is computed. All the computed faces will be fitted on the selected mesh.

  2. You can modify the deviation of the computed curves: select one curve in the scene, and move the slider in order to choose to be closer or smoother.

  3. Inside the Results section, you can see:

    • The Standard deviation for curves

    • The Max deviation for curves, corresponding to the curve having the maximum standard deviation

    • The Standard deviation for faces

    • The Max deviation for faces, corresponding to the face having the maximum standard deviation

Tips & Tricks

A polyline network can be obtained through different workflows:


Practise

See the Beginners Guide CAD to see exactly how to construct polylines on the mesh in order to have good delimitations along curvature or sharp edges. This polyline network is very important to have a nice result, otherwise, final surfaces may be not adequate.