BIM Inspect Scan

This command allows to import the scanned data. Scanned data can be loaded either from a file on the disk or directly from a FIELDWORX database or FIELD360.

1. Select the scanned data:
   

   1. FIELDWORX button allows to import directly from Leica Cyclone FIELDWORX. Refer to section below.

   2. FIELD360 button allows to import directly from Leica Cyclone FIELD360. Refer to section below.

   3. Browse button allows to import e57, pts and lgs point cloud.

2. The selected scan will be automatically displayed and zoom on. It will be sampled according to BIM Inspect Specific Settings.

3. Then click Next to validate and continue (BIM Inspect Align).

Import from FIELDWORX

1. Select the project.

2. With List registered ModelSpace views, choose to display either FIELDWORX registered setups or raw ones.

3. Select the setup to import. Setups can be sorted by date or by name.

4. Validate with Import Button.

Import from FIELD360

1. Open Cyclone FIELD360 and Start Sync Server.

2. Click the FIELD360 button and fill the IP Address and Port on Cyclone 3DR side with data given on Sync page. Both devices have to be connected to the same Wifi network. Click Connect.

3. Select one job to import among the list. Note that setups are only pre-registered together by Cyclone FIELD360. They will be sent to Cyclone 3DR in their lightweight format to ensure fast data transmission.

4. Choose whether you want to import Intensity only or Intensity + Real color.

5. Validate with Import Button.