Cloud vs
This command calculates a color map to show the deviations between two objects.
Select the two objects to inspect and launch the command.
The first selected object is the reference object.
The second selected object is the measured object that will be projected on the reference.
The Cloud here is the measured object for the inspection.
List of reference objects available
Mesh
CAD Surface
Surfacic Geometry
BIM
Description of the command
The dialog box asks which object should be colored. In the case Cloud vs Cloud, you can only colored the measured cloud, refer to vs Cloud.
Force projection direction: If you choose not to force the direction, the software will search the closest point in 3D, else you have to enter a direction for the inspection.
Both sides: Only available if the direction is forced.
Max distance: Enter the threshold distance over which the points are considered as too far away. These points will not be used for the color map. The default value can be computed with the Restore default value button.
Detailed report: This option is used to add a list of all inspect points in the report. Only available for Cloud vs Mesh, Cloud vs CAD Surface, Cloud vs Geometry and Cloud vs BIM.
Keep only relevant points: This option allows to ignore points whose projections are on the free edges. This option is not available in the case Cloud vs Cloud, or if the reference object is closed.
Validate the command with OK, or, close the dialog box with Cancel.
Once the color mapping is computed, a special object is created with distance and color information. You can edit the colors by clicking on Edit color. The command Edit Colors is launched.