Measure Deviation
This command creates new labels on object with intensities or deviations. Such labels are generally used after inspection to prepare an inspection report.
To create a new label, launch the command and click in the 3D scene on an object.
Set both tolerances (Tol+/Tol-).
These parameters are only suitable for compared object when both objects (colored measured + reference
or colored reference + measured) are still in the current project with their initial names.
Note also the label size must be long to read all details. You can set this parameters thanks to Label settings.
Choose the ID Number of the next label.
Optionally, write a Comment for the next label.
Optionally, Include the current CS name (the data are given in this UCS).
Click onto the object to add the label.
Continue clicking to add another ones. Press DEL to undo the last label.
Information about labels
The number of "+" or "-" sign depends on position of measurement inside the tolerance:
|
|
The distance between reference and measurement is |
|
++++! |
out of the high tolerance. |
|
++++ |
between 75 and 100% of the high tolerance. |
|
+++ |
between 50 and 75% of the high tolerance. |
|
++ |
between 25 and 50% of the high tolerance. |
|
+ |
between 0 and 25% of the high tolerance. |
|
|
The distance is very close to 0. |
|
- |
between 0 and 25% of the low tolerance. |
|
-- |
25 and 50% of the low tolerance. |
|
--- |
50 and 75% of the low tolerance. |
|
---- |
75 and 100% of the low tolerance. |
|
----! |
out of the low tolerance. |
