Create Limit Box

images/download/attachments/113546638/Cmd3PtsClippingBox.svg

This command is used to define a 3D limit box.

No selection is required to launch the command.

  1. Launch the command.

  2. Click three points using Define points.

    1. Points n°1 and 2 will define the basis of the box. Note that the basis will be parallel to XoY plane from the current UCS.

    2. Point n°3 will set the height of the box.

  3. A limit box is created and all previous ones are automatically deactivated.

Only one limit box can be activated at once.

Depending on your hardware configuration, a limited number of limit planes can be activated additionally to a limit box.