Define points

When the software waits for a point (to draw or extract an object), a dedicated toolbar is displayed in the bottom of the 3D scene which allows to define snapping option.

Next to the cursor of your mouse, you can see the coordinates of the current point and an icon in order to show you which kind of point it is. You can select several options simultaneously, but some of them are not compatible (for example, you can't select both point on selection and vertex / end).

Option

Description

Additional parameters

images/download/attachments/113546316/SmartPick.svg SmartPick View

This option displays an additional window which follows the cursor so as to check what is snapped.

images/download/attachments/113546316/PointOnSelection.svg Point on Selection

The point clicked is directly projected on the entity behind the click.

images/download/attachments/113546316/VertexEnd.svg Vertex / End

The point clicked is an existing point (for example a line extremity, a vertex from a triangle, etc.). When you use a point cloud, you can also click on a particular point of the cloud.

images/download/attachments/113546316/Nearest3DProjection.svg Nearest 3D Projection

The point is projected in 3D on the nearest entity. "3D projection" means the shortest distance between a point and a 3D model.

Some commands like N Points Registration provide you with the possibility of combining ball radius compensation and explicit coordinates.

images/download/attachments/113546316/MiddleCenter.svg Middle / Center

The point clicked is the middle of a line or a geometric feature center (circle center, sphere center, etc.).

images/download/attachments/113546316/Intersection.svg Intersection

The point clicked is the intersection between two lines (in 2D or 3D).

When the system computes an approximate intersection, it uses an accuracy that depends on the zoom factor. This means that if there is not a real intersection between two lines and if you make a zoom to focus on the intersection area, so as to see the small gap between lines, the system will not make the intersection. However, if you zoom out, the intersection will be created (and the point will be equidistant from the two lines). The minimum distance between the two lines will be given in a warning message saying you that there is no real 3D intersection between the lines.

images/download/attachments/113546316/XYZ.svg XYZ

The point will be created at the specified coordinates. If the point is clicked, the point will be created at the point clicked with a depth estimation (using what is currently displayed).

You can enter XYZ coordinates.

Read Entering coordinates

images/download/attachments/113546316/SurveyingTarget.svg Surveying Target

Extract target center automatically (thanks to a seed point, only for clouds). Three types of targets can be extracted:

  • Planar black and white target on a cloud containing intensity (alternatively two black and white triangles or squares).

  • Planar blue and white target on a cloud containing intensity (two concentric disks, one white on the center and the other blue).

  • Spherical target which diameter is known.

You have to enter the target diameter.

images/download/attachments/113546316/HighestPoint.svg Highest Point

The point will be created at the highest point above seed point(Only for clouds).

images/download/attachments/113546316/LowestPoint.svg Lowest Point

The point will be created at the lowest point below seed point(Only for clouds).

images/download/attachments/113546316/GroundPoint.svg Ground Point

The point will be created at the ground level above or below seed point(Only for clouds).

You have to enter a search radius (buffer area which will lead to a ground computation)

images/download/attachments/113546316/WhiteLine.svg White Line

The point will be created at the axis of white lines thanks to a seed point(Only for clouds with intensities)

You have to enter a search radius (buffer area where the software will recognize white lines)

Entering coordinates

You must enter in the field one, two or three values separated by a character that is neither a number nor a character nor a dot. Remember that the coordinate field is modal, this means that if a value is missing, it will keep its value from the previous coordinate entered.

  • Enter "1, 2, 3." The software will understand X=1; Y=2 and Z=3.

  • Enter now "1.1 2.2." The software will understand X=1.1; Y=2.2 and Z=3. As the third coordinate is missing, the Z coordinate will keep the previous value.

  • The letter 'D' before X, Y or Z means an increment of the corresponding value. Enter "Y5 DX3". The software will understand X=4.1 because the previous value was 1.1 and DX3 means "add 3 to X"; Y= 5; Z= 3.3 because it keeps its value.