BIM Inspect Parameters

This command performs the inspection between the BIM model and the scanned data.

The color map is applied on the BIM object selected in the previous step (BIM Inspect Select Objects).

The points used for the analysis are either the original scan or the cleaned scan ("CleanedCloud") depending on if the step BIM Inspect Clean has been done.

images/download/attachments/113547144/qa2021_n0081.png

Define the inspection parameters:

  1. Choose among which direction the inspection will be done.

    Deviations will be signed according to the BIM model or meshes orientation.

  2. Check Exclude points and define a threshold to filter out points which are too far from the inspected part. This setting is necessary to improve computation time.

  3. Click Inspect BIM button. The colored BIM object is displayed.

    Validating this computation later will cancel previous workflow results, if any.

  4. Then click Next to validate and continue (BIM Inspect Colormap ).