Refine Mesh

Tip & Trick

The strategy to obtain the best result is to use the commands Refine mesh as many times as necessary (often 2 or 3 steps are enough) until the noise of your point cloud begins to appear on the surface of your model. The first step is, of course, to start from a rough mesh that you can obtain with the command 3D Mesh.
Of course, this process depends on the quality of the point cloud.

Note that you can start with a deviation error really bigger than the accuracy of your measurement. This is because the "real" accuracy is generally worse than the theoretical accuracy because the "real" measurement conditions are most often very far from the ideal conditions in a laboratory!

images/download/attachments/113546881/3DRAppShoe1.JPG

The best deviation error D to be used is the value that provides only a small noise effect. At this step, if we continue to decrease the deviation error, the result is getting worse.

Note

The main difference between Refine Mesh from Cloud Interpolation and Refine Mesh from cloud are:

  • Refine Mesh from cloud takes some of the points in the cloud. If noise reduction is activated the function will try to take points in the middle of the noise thickness, if any. However, if no point is present in the middle of the noise thickness, it may result a very noisy shape.

  • Refine Mesh from Cloud Interpolation creates some new points evenly spaced, which do not exist in the cloud. These points are placed in the middle of the noise thickness even if there is no corresponding point inside your cloud.

To summarize: Refine Mesh from cloud will add details at the cost of less smoothing while Refine Mesh from Cloud Interpolation will smooth the mesh in the middle of noise.

If your point cloud is very noisy and dense, you can obtain a better results with "Interpolation".

If your point cloud is very accurate or sparse, you can obtain better results with Refine Mesh from cloud to create a mesh having the best quality possible.

Note that sometimes, Refine Mesh from cloud can be used as an intermediate step between the first meshing (rough) and the last refining with interpolation of points. This 3 step processing helps getting a final nice result when the first mesh is too rough to be refined afterwards with interpolated points. Refine Mesh from cloud enables to add details on the rough mesh.

images/download/attachments/113546881/image2015-12-10_11_7_49.png

Meshing with Refine Mesh from cloud (deviation error refine) always uses points that belong to the cloud while Refine Mesh from Cloud Interpolation (refine) will create new points in the middle of the thickness of the cloud.

Practise

See the Exercise: Improve the 3D Mesh of the Samothrace Victory in the Beginners Guide.